So you go to your local Sears store and there’s a complete wall of garage door openers. The sales associate is helpful and shows you all of the products. But you just quit confused. I will make it simple and give you the easiest way to figure out that Craftsman garage door opener is best for you.
There are five basic actions to help you get the ideal door opener and set up in you place.
Step One, Measure the height of door:
Step Three, Select the type of garage door opener?
Step Four, Select the Kind of remotes you’ll need:
Step Five, Professional Installation or Install it yourself:
Measure One, Assess the height of you door:
Assess the height of the opening, not the door itself. Most garages door openings are approximately 7 feet high. If your opening is 8 ft, 9 feet or 10 feet you’ll need to purchase an expansion along with the garage door opener itself. If it’s approximately 8 feet buy the 8 foot expansion. If it is 9 or 10 feet buy the 10 foot extension. To pick any best garage door opener with remote controller you need to pay few extra bucks.
Step Two, Select the HP:
There are just two horsepower ratings for most garage door openers. 1/2 HP and 3/4 HP.
In case you have an aluminum aluminum coated, or fiberglass door a 1/2 HP is plenty strong to open both a single automobile (7 to 9 feet wide) or a dual car (16 feet wide) door.
In case you have a wood door, a door with windows installed inside, a steel door or among the new doors that seem as though they are off an old carriage house I advise that you go with the 3/4 HP doorway. (When a magnet sticks to your doorway it is steel)
A new single car carriage design door may utilize a 1/2 HP opener. In case you’ve got an extra tall door (9 or 10 feet) or a doorway that is wider than 16 feet I also recommend you go with the 3/4 HP door. If you’ve got a one-piece door (usually an old doorway made out of wood) I urge a 3/4 HP doorway.